Pipe support

Pipe support systems

Pipe supports
Pipe clamps, special clamps
Pipe brackets / round steel brackets
Pipe saddles
Sliding guides
Primary and secondary support structures and special supports

Systems and components for screw or clamp mounting of pipe holders

Sliding bearings in the standard version or low friction with PTFE-chambered inserts or as a roller bearing
As a guide bearing with and without lifting protection / adjustable in height
As a fixed point

Manufacture to all DIN EN ISO standards, as well as factory standards or customers’ requests

Materials
All common EN and ASTM standard materials, e.g. S235, P265, S355, P355
P460 fine grain structural steels, heat-resistant materials 16Mo3, 13CrMo4-5, 10CrMo9-10, austenitic / corrosion-resistant steels 1.4301, 1.4541, 1.4571, 1.4539, etc.

Surface finishes

Coating to factory standard
Customer specification
Raw (black) or hot-dip galvanized

Of course, a load calculation certificate can be provided for all our holding systems.

Load calculation certificate

T 30 B - T 30 KK

Ordering example (standard version): T 30 CC 169
Standard pipe slides with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=60 mm, Length L=300 mm according to the dimension sheet. Material group 0 (=no data): Overall design from S235JRG2 hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): T 30 KK 200 H=160 L=400 WG7 pipe slide with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø200 mm similar to DIN 3567 inclined at approximately 45° (KK design); height H=130 mm, (Ù H1=22 mm); carriage width B=60 mm, in accordance with the dimension sheet length L=400 mm. Material group 7: Foot construction from S235JRG2, hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clamp inside diameter, slide length L, height 30 mm
Additional facilities:
Clamp insert (see supplementary sheet), stainless steel sliding plate (V or VS),

T 60 B - T 60 KK

Ordering example (standard version): T 60 CC 169
Standard pipe slides with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=60 mm, Length L=300 mm according to the dimension sheet. Material group 0 (=no data): Overall design from S235JRG2 hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): T 60 KK 200 H=160 L=400 WG7 tube slides with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø200 mm similar to DIN 3567 inclined at 45° (KK design); height H=160 mm (Ù H1=52 mm); slide width B=60 mm, in accordance with the dimension sheet, length L=400 mm. Material group 7: Foot construction from S235JRG2 hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clamp inside diameter, slide length L, height 40 mm
Additional facilities:
Clamp insert (see supplementary sheet), stainless steel sliding plate (V or VS),

T 80 B - T 80 KK

Ordering example (standard version): T 80 CC 169
Standard pipe slides with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=80 mm, length L=300 mm according to the dimension sheet. Material group 0 (=no data): Overall design from S235JRG2 hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): T 80 KK 200 H=160 L=400 WG7 tube slides with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø200 mm similar to DIN 3567 inclined at 45° (KK design); height H=160 mm (Ù H1=52 mm); slide width B=80mm, in accordance with the dimension sheet, length L=400 mm. Material group 7: Foot construction from S235JRG2 hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clamp inside diameter, slide length L, height 40 mm
Additional facilities:
Clamp insert (see supplementary sheet), stainless steel sliding plate (V or VS),

T 100 B - T 100 KK

Ordering example (standard version): T 100 CC 169
Standard pipe slides with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=100 mm, length L=300 mm according to the dimension sheet. Material group 0 (=no data): Overall design from S235JRG2, hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): T 100 KK 200 H=160 L=400 WG7 tube slides with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø200 mm similar to DIN 3567 inclined at 45° (KK design); height H=160 mm (Ù H1=52 mm); slide width B=100mm, in accordance with the dimension sheet, length L=400 mm. Material group 7: Foot construction from S235JRG2 hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clamp inside diameter, slide length L, height 40 mm
Additional facilities:
Clamp insert (see supplementary sheet), stainless steel sliding plate (V or VS),

T 120 B - T 120 KK

Ordering example (standard version): T 120 CC 169
Standard pipe slides with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=120mm, length L=300 mm according to the dimension sheet. Material group 0 (=no data): Overall design from S235JRG2 hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): T 120 KK 200 H=160 L=400 WG7 tube slides with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø200 mm similar to DIN 3567 inclined at 45° (KK design); height H=160 mm (Ù H1=52 mm); slide width B=120 mm, in accordance with the dimension sheet, length L=400 mm. Material group 7: Foot construction from S235JRG2 hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clamp inside diameter, slide length L, height 40 mm
Additional facilities:
Clamp insert (see supplementary sheet), stainless steel sliding plate (V or VS),

TH 80 B - TH 80 KK

Ordering example (standard version): TH 80 CC 169
Standard pipe slides with foot construction from T-profile according to DIN 1024 and extension of flat steel corresponding to clamp material and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=80 mm, length L=300 mm according to the dimension sheet. Material group 0 (=no data): Overall design from S235JRG2, hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): TH 80 KK 145 H=220 L=400 WG7 tube slides with foot construction from T-profile according to DIN 1024 and extension made of flat steel corresponding clamping material and 2 pipe clamps Ø145 mm similar to DIN 3567 inclined at 45° (KK design); height H=220 mm (Ù H1=52 mm); slide width B=80 mm, in accordance with the dimension sheet length L=400 mm. Material group 7: Foot construction from S235JRG2, hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clamp inside diameter, slide length L, height 40 mm
Additional facilities:
SClamp insert (see supplementary sheet), stainless steel sliding plate (V or VS), fixed-point cam FP (in conjunction with the associated carrier dimension)

THV 100 B - THV 100

Ordering example (standard version): THV 100 CC 169
Standard pipe slides with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=100 mm, length L=300 mm according to the dimension sheet. Material group 0 (=no data): Overall design from S235JRG2, hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): THV 100 KK 200 H=275 L=400 WG7 tube slide with foot construction from T-profile according to DIN 1024 and 2 pipe clamps Ø200 mm similar to DIN 3567 inclined at 45° (KK design); height H=275 mm (Ù H1=175 mm); slide width B=100 mm, in accordance with the dimension sheet length L=400 mm. Material group 7: Foot construction from S235JRG2 hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clamp inside diameter, slide length L, height 40 mm
Additional facilities:
Clamp insert (see supplementary sheet), stainless steel sliding plate (V or VS), fixed-point cam FP (in conjunction with the associated carrier dimension)

L 150 B - L 150 KK

Ordering example (standard version): L 150 CC 169
Standard pipe slides with foot construction from L-profile according to DIN 1029 and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=200 mm, length L=300 mm according to the dimension sheet. Material group 0 (=no details): Overall design from S235JRG2 hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): L 150 K 200 H=275 L=100 WG7 pipe slides with foot construction from T-profile according to DIN 1029 and 1 pipe clamp Ø200 mm similar to DIN 3567 inclined at 45° (K design); height H=275 mm (Ù H1=175 mm); slide width B=200 mm, in accordance with the dimension sheet length L=100 mm. Material group 7: Foot construction from S235JRG2 hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clamp inside diameter, slide length L, height 40 mm
Additional facilities:
Clamp insert (see supplementary sheet), stainless steel sliding plate (V or VS), fixed-point cam FP (in conjunction with the associated carrier dimension)

LH 150 B - LH 150 KK

Ordering example (standard version): LH 150 CC 169
Standard pipe slides with foot construction from L-profile according to DIN 1029 web extensions in clamp widths 40 mm high and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=200 mm, length L=300 mm according to the dimension sheet. Material group 0 (=no details): Overall design from S235JRG2 hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): LH 150 K 200 H=275 L=100 WG7 pipe slides with foot construction from T-profile according to DIN 1029 web extensions and 1 pipe clamp Ø200 mm similar to DIN 3567 inclined at 45° (K design); height H=275 mm (Ù H1=175 mm); slide width B=200 mm, in accordance with the dimension sheet, length L=100 mm. Material group 7: Foot construction from S235JRG2, hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clamp inside diameter, slide length L, height 40 mm
Additional facilities:
Clamp insert (see supplementary sheet), stainless steel sliding plate (V or VS), fixed-point cam FP (in conjunction with the associated carrier dimension)

U 150 B - U 150 KK

Ordering example (standard version): U 150 CC 169
Standard pipe slides with foot construction from U-profile according to DIN 1026 and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=200 mm, length L=300 mm according to the dimension sheet. Material group 0 (=no details): Overall design from S235JRG2, hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): U 150 K 200 L=100 WG7 pipe slides with foot construction from U-profile according to DIN 1026 and 1 pipe clamp Ø200 mm similar to DIN 3567 inclined at 45° (K design); slide width B=200 mm, according to the dimension sheet, length L=100 mm. Material group 7: Foot construction from S235JRG2, hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clip inside diameter, slide length L

Additional facilities:
Clamp insert (see supplementary sheet), stainless steel sliding plate (V or VS), fixed-point cam FP (in conjunction with the associated carrier dimension)

UH 150 B - UH 150 KK

Ordering example (standard version): UH 150 CC 169
Standard pipe slides with foot construction from U-profile according to DIN 1026 web extension in clamp widths 40 mm high and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=80 mm, length L=300 mm according to the dimension sheet. Material group 0 (=no details): Overall design made in S235JRG2, hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): UH 150 K 200 H=175 L=100 WG7 pipe slides with foot construction from U-profile according to DIN 1026, web extensions in clamp width and 1 pipe clamp Ø200 mm similar to DIN 3567 inclined at 45° (K design); height H=175 mm (Ù H1=75 mm); slide width B=100 mm, in accordance with the dimension sheet, length L=100 mm. Material group 7: Foot construction from S235JRG2, hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clamp inside diameter, slide length L, height 40 mm
Additional facilities:
Clamp insert (see supplementary sheet), stainless steel sliding plate (V or VS), fixed-point cam FP (in conjunction with the associated carrier dimension)

S 150 B - S 150 KK

Ordering example (standard version): S 150 CC 169
Standard pipe slides with foot construction from welded sheet metal and 2 pipe clamps Ø169 (DN 150) according to DIN 3567 in the horizontal position (CC design); slide width B=150 mm, length L=300 mm according to the dimension sheet. Material group 0 (=no details): Overall design made in S235JRG2, hot-dip galvanized bolts DIN 601 4.6 tZn

Ordering example (special design): S 150 K 200 H=275 L=100 WG7 pipe slides with foot construction from welded metal according to DIN 1029 and 1 pipe clamp Ø200 mm similar to DIN 3567 inclined at 45° (K design); height H=275 mm (Ù H1=175 mm); slide width B=200 mm, in accordance with the dimension sheet, length L=100 mm. Material group 7: Foot construction from S235JRG2, hot-dip galvanized pipe clamps made of 1.4571 raw, screws/nuts DIN 931/934 A4

Variable dimensions:
Clamp inside diameter, slide length L, height 40 mm
Additional facilities:
Clamp insert (see supplementary sheet), stainless steel sliding plate (V or VS), fixed-point cam FP (in conjunction with the associated carrier dimension)

TRH …. A

Ordering example (standard version): TRH0324A
Standard pipe slides with foot construction made of welded sheet metal and 2 pipe clamps Ø324 (DN 300) similar to DIN 3567 in the horizontal position (A design); slide width B=180 mm, length L=325 mm according to the dimension sheet. Overall design made in S235JR, hot-dip galvanized bolts DIN 601 4.6 Ordering example (special design): TRH0324A Pipe slides with foot construction made of welded sheet metal and 2 pipe clamps Ø324 similar to DIN 3567 inclined at 10°; height H=300 mm (U H1=138 mm) slide width B=180 mm, in accordance with the dimension sheet length L=400 mm.

Variable dimensions:
Clip inside diameter, slide length L, height or in accordance with drawing and request

Additional facilities:
On request

TRH …. B

Ordering example (standard version): TRH0324B
Standard pipe slides with foot construction made of welded sheet metal and 2 pipe clamps Ø324 (DN 300) similar to DIN 3567 in the horizontal position (A design); slide width B=180 mm, length L=325 mm according to the dimension sheet. Overall design made in S235JR, hot-dip galvanized bolts DIN 601 4.6 Ordering example (special design): TRH0324B Pipe slides with foot construction made of welded sheet metal and 2 pipe clamps Ø324 similar to DIN 3567 inclined at 10°; height H=300 mm (U H1=138 mm) slide width B=180 mm, in accordance with the dimension sheet length L=400 mm.

Variable dimensions:
Clip inside diameter, slide length L, height or in accordance with drawing and request

Additional facilities:
On request

TRH …. C

Ordering example (standard version): TRH0324C
Standard pipe slides with foot construction made of welded sheet metal construction and 2 pipe clamps Ø324 (DN 300) similar to DIN 3567 in the horizontal position (version A); slide width B=245 mm, length L=400 mm according to the dimension sheet. Overall design made of 16Mo3 screws DIN 931 from 21CrMoV57 nuts DIN 934 from 24CrMo5. Ordering example (special version): TRH0324C Pipe slides with foot construction made of welded sheet metal and 2 pipe clamps Ø324 similar to DIN 3567 inclined at 10°; height H=450 mm (U H1=288 mm) slide width B=245 mm, in accordance with the dimension sheet length L=500 mm.

Variable dimensions:
Clip inside diameter, slide length L, height or in accordance with drawing and request

Additional facilities:
On request

TRH …. F

Ordering example (standard version): TRH0115F
Standard pipe slides with foot construction made of T profile and 2 pipe clamps Ø115 (DN 100) similar to DIN 3567 in the horizontal position (version A); slide width B=50 mm, length L=200 mm according to the dimension sheet. Overall design made in S235JR hot-dip galvanized bolts DIN 601 4.6 Ordering example (special design): TRH0115F pipe slides with foot construction made of T profile and 2 pipe clamps Ø120 (no DN) similar to DIN 3567 in the horizontal position (version A); slide width B=50 mm, length L=250 mm according to the dimension sheet. Overall design made in S235JR TZN screws DIN 601 4.6 TZN (galvanized)

Variable dimensions:
Clip inside diameter, slide length L, in accordance with drawing and request

Additional facilities:
On request